RS50/RS60/RS70 Smart Targets

Prices
$8.25
1 - 24
$7.10
25 - 49
$6.80
50 - 99
$6.30
100 or more
Prices
$10.05
1 - 24
$8.85
25 - 49
$7.35
50 - 99
$6.85
100 or more
Prices
$6.70
1 - 24
$4.95
25 - 49
$4.10
50 - 99
$3.60
100 or more
Prices
$39.00
1 - 4
$34.40
5 - 9
$31.55
10 or more

RS50 to RS70 Retro Reflective Survey & Total Station Targets

Survey & Construction Targets for documentation, verification and permanent proof on the construction site

The all-around targets for measuring and accuracy

 

Rothbucher Systeme’s RS50, RS60 and RS70 Survey Targets are the fast, permanent way to precisely control construction layout

Like all Rothbucher Systeme markers the RS50,RS60 and RS70 Smart Targets are low profile, so shots are taken directly at the point of interest, with no prism offset. For accurate control and precise, 3D monitoring, the RS60, with reflective tape, is the best choice for use with modern total stations. The RS70, with simple, high-contrast cross hairs, is best for ultra-quick, super-precise elevation checks.

Reflective Survey Targets used for monitoring retaining walls.

Both markers are easy to set, and easy for other tradesmen on the site to use—set as many of these unobtrusive markers as you need (they’re inexpensive) and label with permanent markers: your clients and subcontractors will thank you.

Great for backsights, check shots, elevation references and monitoring situations, ‘Smart from the Start’ Rothbucher Systeme markers are the best way to take advantage of your investment in high tech survey equipment. Save crew time, keep employees out of danger, get better data, and feel more secure about construction layout: can you afford not to use Rothbucher Systeme markers?

Reflective Survey Targets RS50 & RS60

  • Reflective Surveying TargetFor quick positioning with tachymeter and all common measuring devices.
  • Range from 10m to 100m
  • For bridge and tunnel construction
  • For long-term monitoring of bridges and buildings
  • For measuring and monitoring facades
  • For industrial construction and hall construction
  • For the quick and precise leveling of finished parts
  • For the leveling of production and assembly lines
  • For ensuring the correct measurement of heights and axes
  • Temperature and UV resistant
  • Can be mounted even on difficult surfaces

Construction Targets RS70

  • Construction Survey TargetFor ensuring the correct measurement of heights and axes
  • For leveling tile grids
  • For industrial construction and hall construction
  • For the leveling of production and assembly lines
  • Temperature and UV resistant
  • Can be mounted even on difficult surfaces

Please note:

It is recommended that only smart targets with reflective targets are used for distance measurements with tachymeters or total stations.

Smart targets with cross hairs, and without target reflectors are available for the use with leveling instruments, theodolites and construction lasers.