Top Security Cap for ¾" Aluminum Security Rod Monuments
These are exactly the same as the rod monuments, except that, for the top section a security rod with three aluminum fins is used. This increases the stability of the mark. All sections of the monument, including the top security section can be driven straight into the soil or the top section can be isolated from the topsoil as shown below.
The fins of the top security section can be peeled back with vice grips if it is necessary to cut the top section. This enables the cap to be tapped on.
BMAC6- Access Cover for 5" & 6" PVC
MTSD14 - 3¼" Top Security Domed Aluminum Cap
MTSDR3- ¾" x 3' Top Security Rod with thread
MHDRR4- ¾" x 4' Aluminum Rod with thread
MHDRR3- ¾" x 3' Aluminum Rod with thread
MHDRR2- ¾" x 2' Aluminum Rod with thread
MHDRR1- ¾" x 1' Aluminum Rod with thread
MHDR12- Spiral Drive Point for 3/4" Rod