Adhesive Trail & Path Markers
Our trail and path markers are all Duracast Style reflective das Curb Markers. Using the das Curb Marker Adhesive, the markers can be permanently installed on concrete, asphalt or just about any flat surface. They can also be affixed using screws, nails, or tie-wraps to posts, fences & trees. Permanently mark trails, paths and bike paths with numbers, distance and direction. The markers are an unobtrusive yet highly visible method of placing information, identification, and features directly on the path or trail.
Duracast Style Markers
Abrasion & UV Resistant
The das Duracast Curb Marker is made from a .030 opaque white plastic. This proprietary material contains U.V. inhibitors and a layering of materials for flexibility and impact resistance. The printing is on the surface of the material which is then covered with the SolarShield clear coat for added U.V. resistance. Finally a polyurethane "dome" is applied to the face of the marker. This optically clear, self-healing, non-yellowing, Duracast surface protects against mechanical and chemical abrasion. The Duracast surface effectively doubles U.V. resistance as well.
All Stock Titles are 2½" circles with either reflective or non-reflective APWA color-coded background color.
Duracast Weatherometer Info
Winona State University/Composite Materials Technology Center - 3/2/98 Tested: Duracast style das Curb Marker. Stock Titles all colors reflective & non-reflective.
Testing Mechanism: QUV Weatherometer
Cycle: 4 hours UVA at peak emission at 60°C followed by 4 hours of condensation at 50°C.
Duration: 2,000 hours.
Results Summary: "The test duration of the das Curb Marker is equivalent to 30 years of outside exposure."
" None of the exposed Duracast samples showed any signs of fading when compared to unexposed samples and the Duracast finish did not yellow or cloud."
"None of the exposed samples showed any signs of cracking."
For installation instructions Click Here