60 x 60 mm Retro Reflective Tape Survey Targets
** Now in Easy-to-Peel Sheets of 4 **
Adhesive Surveying Targets are the easy way to faster, more accurate construction layouts
Are you ever coming back? That’s the question you should ask yourself every time you take a total station shot because, if you are coming back—even just once—you’ll thank yourself for setting one of Rothbucher System’s inexpensive, long lasting and efficient Reflective Survey Targets. The reflective tape gives a good reading from most angles, and the low profile, UV resistant tape and strong adhesive mean that you can take the exact same shot—without prism offset—every time.
Great for backsights, check shots, elevation references and monitoring situations, ‘Smart from the Start’ Rothbucher System markers are the best way to take advantage of your investment in high tech survey equipment. Save crew time, keep employees out of danger, get better data, and feel more secure about construction layout: can you afford not to use Rothbucher System markers?
Target reflectors w/ cross hair 20 x 20 mm: range approx. 50 m (164 ft)
Target reflectors w/ cross hair 30 x 30 mm: range approx. 80 m (262 ft)
Target reflectors w/ cross hair 40 x 40 mm: range approx. 100 m (328 ft)
Target reflectors w/ cross hair 60 x 60 mm: range approx. 120 m (393 ft)
Target reflectors w/ cross hair 220 x 220 mm: range approx. 500 m (1640 ft.)
The ranges are average values and will be greatly exceeded by most current measuring instruments. A minimum distance of 10 m is required for some instruments. Survey markers with reflective targets are exclusively recommended for carrying out distance measurement using EDM's or total stations.
Smart Targets with crosshairs and without reflective targets, are available for the use of leveling instruments, theodolites and construction lasers.