Customer Service
M-F 8:00am - 4:30pm CST

Utility Curb Markers - 2.5" Reflective LOW STOCK (over 40 designs available)

100 - 499
500 - 999
1000 or more
All prices USD
Availability: In Stock
Add To Field Bag


Please Select From Our Design Groups:
Selected Design:

Product Details

Damage Prevention & Utility Curb Markers

Permanently mark your underground utilities where conventional signage cannot be used.  das Curb Markers are available in bright APWA colors for a uniform professional look.  Aid location, alert potential excavators and das curb markers  - a permanent marking system for concrete, asphalt and metal surfaces.protect your equipment.

Reduce damage to your pipelines/cables by putting a permanent "Call Before You Dig" message on curbs. Each time your locators das curb markers Danger Gas Pipeline Call Before you Digdo a locate, they can glue down a das Curb Marker  leaving a clean looking, professional, warning message. This notifies homeowners, contractors, and other excavators that there are pipelines/cables in the area.

Once the das adhesive cures it takes a hammer and chisel to remove the das Curb Marker™.

Damage Prevention and Locating Marker - Reclaimed Water MainThe das Curb Marker™ has been in use since 1983. An independent lab test showed the marker had very little fading after the equivalent of 30 years of outdoor use. Costly remarking is no longer necessary.

Our bright APWA colors are highly visible making it easy for maintenance crews, locators, or leak detection surveyors to see them. The das Curb Markers are available in both reflective and non-reflecive styles and in virtually any size and shape.

The das Curb Marker™  replaces unsightly spray paint for permanent marking, improving your company’s public image.

The standard das adhesive requires no mixing. Just apply some to the back of the marker and stick it.

Duracast Style Markers
Abrasion & UV Resistant

The das Duracast Curb Marker is made from a .030 opaque white plastic.  This proprietary material contains U.V. inhibitors and a layering of materials for flexibility and impact resistance.  The printing is on the surface of the material which is then covered with the SolarShield clear coat for added U.V. resistance.  Finally a polyurethane "dome" is applied to the face of the marker.  This optically clear, self-healing, non-yellowing, Duracast surface protects against mechanical and chemical abrasion.  The Duracast surface effectively doubles U.V. resistance as well.

All Stock Titles are 2½" circles with either reflective or non-reflective APWA color-coded background color.

Duracast Weatherometer Info

Winona State University/Composite Materials Technology Center - 3/2/98

Tested: Duracast style das Curb Marker.  Stock Titles all colors reflective & non-reflective.
Testing Mechanism: QUV Weatherometer
Cycle: 4 hours UVA at peak emission at 60°C followed by 4 hours of condensation at 50°C.
Duration: 2,000 hours.

Results Summary: "The test duration of the das Curb Marker is equivalent to 30 years of outside exposure."
" None of the exposed Duracast samples showed any signs of fading when compared to unexposed samples and the Duracast finish did not yellow or cloud."
"None of the exposed samples showed any signs of cracking."

For installation instructions Click Here


Duracast Style Markers - Abrasion & UV Resistant
Mix & Match your order of curb markers
Just add initial order to your shopping cart
(minimum order 100 pieces) then during checkout
type in part #'s and quantity in the comments
section or call us at 1-800-356-7388

Customers who purchased DAS-R2.5 also purchased:

10 - 24
25 - 49
50 - 249
250 - 499
500 or more
10 - 24
25 - 49
50 - 249
250 - 499
500 or more


Product Reviews

Berntsen International, Inc.
  • 1-800-518-0934
  • All other countries:
  • +1-608-249-8549
  • PO Box 8670
  • Madison, WI 53708-8670
We accept VISA, Master Card, American Express and Discover Card.